I found your article helpful in understanding some of the nuances involved in
configuring a wireless print server. I’ve often thought about purchasing one, but have held off due to my lack of technical expertise. After reading your article, however, I think I should be able to get it configured without too much of a problem. However, before I purchase one I had a question I was hoping you could answer for me. I have a Lexmark X5150 All-In-One
Multifunction printer. Can a wireless print server support all of the non-printing functions of my multifunction printer? I use the scanning features quite a bit and if that didn’t work, there would be no point for me to invest the time and money in a wireless print server. Thanks for your help.
Unfortunately, no print server that I know of lets you share the other features (copy, scanning, faxing) of your multifunction printer. In most cases, not even the software used to report other basic information about your printer (like the ink levels) will work once you attach the printer to the print server. That doesn’t mean that one doesn’t exist somewhere, but it has yet to be brought to my attention.
If this type of functionality is really important to you, then you might want to consider upgrading your printer to one designed specifically for this purpose. For example, the HP Officejet 7400 All-in-One Printer, Fax, Scanner, Copier series has a built-in wireless print server and allows up to five individuals to access all of the printer’s features over the wireless connection. You can fax, copy, print and yes, scan right from your PC. I know this isn’t an ideal solution because at nearly $500, the OfficeJet is not cheap. However, it is a high-end printer that’s capable of scanning resolutions up to 4800dpi, so you should be very happy with the results.
If anyone happens to come across another solution to this problem, please use our feedback forum to let me know.
I’m bit confused about wireless encryption levels and was wondering if you could explain them to me. Some of the wireless devices I’ve come across say that they are using 40-bit encryption, while others say they are using 128-bit and/or 64-bit. Are these encryption levels compatible with each other?
Yes, 128-bit Wired Equivalent Privacy WEP devices can be used with both 40- and 64-bit WEP devices as long as the device driver has a way to set the lower encryption level. The encryption key length determines the encryption level. If a device is capable of 128-bit encryption, it is inherently capable of 40-bit, unless the vendor decides for some reason not to allow the lower encryption level.
In regards to 64-bit and 40-bit encryption, these are also compatible. The reason for this is that 64-bit WEP is really the same as 40-bit WEP.
The lower level of WEP encryption uses a 40-bit, which is a 10-hex character secret key that you set and a 24-bit Initialization Vector, which is not under your control.
Some vendors refer to this level of WEP as 40-bit, others as 64-bit. Either way, they’re the same encryption level and can interoperate.
The higher level of WEP encryption, commonly referred to as 128-bit WEP, actually uses a 104-bit, 26-hex characters, secret key, set by the user and a
24-bit Initialization Vector, which is not under user control. I hope this helps to alleviate your confusion.
I just replaced my old Windows 2000 notebook computer with a new Windows XP Professional laptop. I love my new system, particularly Windows XP. It’s just so much easier to use than Windows 2000, and it seems to crash a lot less. I do have one problem with it, though. On my Windows 2000 PC, I used to spend a lot of time using an application called NetMeeting. This was an important program for me, but for some reason Microsoft seems to have removed it from Windows XP. Can you tell me if it’s possible for me to transfer my old version of NetMeeting onto my new PC? I really need access to this program. Thanks!
For those of you not familiar with it, NetMeeting is a Microsoft application shipped with Windows that lets you participate in virtual meetings, work in shared applications and share data over the Internet or over your company intranet.
When Microsoft introduced Windows XP, it — for some reason — removed NetMeeting from the communication group where it previously resided. As a matter of fact, they took it out of the menu completely. However, it hasn’t been removed from the operating system. NetMeeting installs on your system automatically after you perform a full install of Windows XP. It just doesn’t appear on the Start menu until it’s activated.
Here’s how to ctivate NetMeeting: Go to the Start button and click Run. Now enter CONF on the run line and click OK. This launches the NetMeeting Wizard. Supply the wizard with the necessary information, and then select the Put a shortcut to NetMeeting on my desktop (and/or on my Quick Launch bar) check box. NetMeeting should start and appear in the most frequently used programs list on the Start menu. Enjoy!
|Do you have a comment or question about this article or other small business topics in general? Speak out in the SmallBusinessComputing.com Forums. Join the discussion today!|