D-Link Air Wireless 2.4GHz Print Server

By Joseph Moran | Posted November 20, 2003

Physically D-Link's 802.11b print server is quite compact, only slightly larger than its own external AC adapter. The device connects directly to a printer's parallel port, and a configuration mode toggle switch and a pair of LEDs flank the detachable dipole antenna. Being a 2.4 GHz 802.11b device, (based on an Atheros chipset) the DP-311P is limited to an 11Mbps signaling rate.

D-Link provides a configuration utility for the DP-311P, but its use is optional since you can fully configure the unit via a Web browser. To modify the DP-311P settings, you must first set the toggle switch to "configure" then afterward back to normal before power-cycling the unit for changes to take effect. (The utility software and the Web admin tool both provide exactly the same configuration settings.)

Finding a compatible printer with which to test the DP-311P was more difficult than I expected. Though I own several printers, they all either used a USB interface or a different physical version of the parallel interface that was incompatible with the DP-311P's IEEE 1284 Centronics-style port.

I had to make the rounds of several friends and colleagues before finding one with a suitable printer (a Canon i550). Indeed, given the ubiquity of USB ports, many personal and small-business printers (and almost all inkjets) use USB and USB only (and some parallel laser printers eschew the older Centronics connector), the DP-311P will probably most often find a home paired with a mid-range laser or older printer models. If your printer is of a relatively recent vintage, you want the USB model, the DP-311U, which can be had for about $20 more.

D-Link lists more than two dozen printers from ten vendors that are compatible with the DP-311P, though it's quick to note the list is not all-inclusive. There are also twenty printers that are confirmed to be incompatible with the device (many Windows GDI and multi-function printers qualify). This information is contained within the product manual, available online at D-Link's Web site.

I tested the DP-311P with Windows XP, but D-Link says the device is also compatible Windows 98SE or later, MacOS 9 and X (for PostScript printers only) or Netware 5.x or later (Bindery or NDS). It supports both ad-hoc and infrastructure mode, and provides the ability to configure advanced wireless settings like the transmit rate, preamble length and beacon interval. 64 and 128-bit WEP encryption are supported.

I configured the DI-311P with a static IP address (DHCP is also an option) and had it part of my WLAN in just a few minutes. I used it successfully in both ad-hoc and infrastructure mode, and with both 802.11b and 802.11g (in mixed mode) access points.

The DI-311P's administration tool offers an option to print a test page to verify communication between the device and the printer, but attempts to do so produced nothing. That I could not print the test page belied the fact that the device was configured correctly, because upon creating a TCP/IP-based printer in Windows XP, a test page and all other subsequent print operations completed properly.

Incidentally, you can specify an SMB workgroup and share name so that the DP-311P's printer will be displayed in Network Neighborhood on Windows networks by NetBIOS name. The DP-311P also has some useful management capabilities in the form of SNMP support, as well as a setting which allows the unit to be viewed within the HP WebJet admin utility.

If you have a printer you want to share wirelessly that uses a Centronics parallel port, the D-Link DP-311P works well. It's easy to set up and equally easy to administer.

Adapted from Wi-Fi Planet.com.

Comment and Contribute


     

    Get free tips, news and advice on how to make technology work harder for your business.

    Submit
    Learn more
     
    You have successfuly registered to
    Enterprise Apps Daily Newsletter
    Thanks for your registration, follow us on our social networks to keep up-to-date