Starting Up Brother's Small Business Printer
When you first power up Brother's MFC-J6925dw and load the ink and paper, the unit primes for a few minutes, and then it prints a page with a nozzle check pattern. Ours came out perfect, but if yours doesn't, you can direct the machine to perform a cleaning operation.
Next, you hook up the MFP to a PC or to a network, and Brother gives you ample ways to do this. You'll find jacks for wired Ethernet, USB 2.0, and the telephone cord for the fax located on a panel that you access by swinging the entire scanner unit up on a rear hinge. Many of Brother's printers have ports in this position rather than on the back panel where the rest of the printer industry places them.
The MFC-J6925dw provides a large 3.7-inch color touchscreen on the control panel, and its features are easy to understand and use. We connected the MFP to our network with WPS (Wi-Fi Protected Setup), which required us to just select that method of connection and press the WPS button on our NetGear NightHawk access point. The two devices found each other in a few seconds, and made the necessary network connection in about 20 seconds. Once the CD finished installing and configuring the printer drivers, we were ready to start testing.
Brother's MFC-J925dw Multifunction Printer for small business.
Great Scores for Printer Performance and Image Quality
Generally, we test printers in two areas, speed and image quality, and we add scanning when testing a multifunction printer. We test image quality by printing a set of photographic and other test images on the vendor's own photo paper and compare them (by eye) to a set of prints produced on a calibrated nine-color photo printer.
Our speed tests are a subset of several of the tests developed by the ISO (International Standards Organization) and consist of a four-page Microsoft Word document, a four-page Excel spreadsheet, and a four-page PDF document printed with Adobe Reader XI. We print multiple sets and subtract the time it takes to print the first set to determine PPM (pages per minute). This eliminates the time it takes for the job to spool and start printing, which can vary between different computers and versions of the operating system.
We then average several runs for each document, and average achieved speed on the three different document types to get our overall speed results. In most cases, this gives us a figure that's pretty close to the ISO speed the vendor publishes for color printing using the default print driver settings.
The MFC-J6925dw cranked out 20.2 PPM—almost exactly the 20 PPM figure Brother publishes in its specification. We don't bother doing the same test for copy speed, but the MFC-J6925dw was actually fairly fast in making copies, especially single-sided ones. Brother provides a quick-copy option that requires you to place the document being copied in the ADF in landscape mode. This option further speeds the copy process, and it's worth remembering if output speed is more important to you than print quality (which is still pretty good).
Note that our results refer to printing and copying on one side of the paper. The MFC-J6925dw is capable of duplex printing and scanning. With the scanner, you can either place a document on the glass scan platen, or you can use the ADF (automatic document feeder), which folds out of the top of the MFP and has a capacity of 35 sheets.
Output image quality is excellent, with accurate color and skin tones and good saturation. While Brother doesn't promote the MFC-J6925dw for its photo quality, the device does a good job for a four-color printer (most photo printers these days use five or more colors of ink). Using good quality paper, you won't be embarrassed by the quality of images and charts in your reports.
Printing from Other Sources
The MFP also provides a set of ports, covered by a swing-away door on the left side of the control panel, that act as a "Photo Capture Center." It includes a USB port and several ports for flash media cards including SD cards, Memory stick, MultiMedia card, mini and microSD cards. You can print from this flash media and you can also scan to media placed in these slots.
We were also impressed by the MFP's scanning capabilities. The scanner has an optical resolution for 2,400 x 2,400 dpi on the flatbed, and 2,400 x 1,200 when using the ADF. That's good enough for most any use, but it also offers higher resolutions, up to 19,200 x 19,200 dpi through software interpolation. The MFC-J6925dw handles duplex scanning and extensive "scan-to" options including OCR, flash media, a folder on the PC or Mac, or to the cloud. The printer supports 10 different file formats.
While we didn't test the fax, it offers up to 200 pages of paper out memory, and it can fax broadcast to up to 50 locations.
The Bottom Line
You can easily find less expensive four-function MFPs. And if you know you don't want or need the MFC-J6925dw's 11 x 17 print, scan and copy capabilities, you can save yourself some money. But given the MFC-J6925dw's capabilities, speed, and quality, we feel that its estimated street price of $350 is a good value, and most business owners will appreciate the large ink tanks that bring down the cost of printing.
Ted Needleman published his first review in 1978. Since then, he has written several thousand hardware and software reviews, columns, articles on using technology, and two books. He has no intention of stopping any time soon.
|Do you have a comment or question about this article or other small business topics in general? Speak out in the SmallBusinessComputing.com Forums. Join the discussion today!|